Home    back one page     Mazda                 Mazda     next page Mitsubishi

 

         1.5L E5 CLC (Chain                                                      HAMA 1.5                                $325.00             call for availability

                       The cam top is cast Iron and is match to the head but will normally will work form head to head .

                         

 

          1.5 DOHC S5 Protege 1995-1996                                  HAF/MA 1.5-Z5                       $495.00            

                      

         1.6L BP01   SOHC hydraulic 1988-1990                      HAF/MA 1.6                             $395.00            

                       Mercury Tracer, Mazda 323

                 

         1.6L B6E                                                                        HAF/MA 1.6-B6E                     $495.00           

                       323 GT Mazda turbo or MX3 1988-1989 dist on exhaust cam

             

         1.6L SOHC  Cast #630 Protege,  Tracer 1990-1994       HA/MA 1.6-630                        $295.00           

                     

 

        1.8L DOHC 16V Protege Ford Escort GT                     HAF/MA 1.8-BP05                  $495.00           

         1.8 SOHC 16V Protege                                                  HAF/MA 1.8-16V                    $495.00            

                     

 

         2.0L DHOC  FS2     MR2,626,MX6                                         HAF/MA 2.0-FS2                    $495.00     

               Note ( later modle do not have the distutor drive and are not hydrolic)  Later modles maybe FS-9 casting       

Casting Number

 

 

              

         2.0L Mazda fork lift head     Chain Drive                    HAMA 2.0-IND                       $465.00            call for availability

 

         2.0L Mazda Car FE     Belt Drive                                 HAMA 2.0                                $365.00            

         2.0L Mazda Truck manual adjucter                              HAMA 2.0-PU                          $365.00            

                      626  Belt Drive cam has distributor gear 1982-1987

         

 

         2.2L Pick up with Hydra Lifters  1988 up                     HAMA 2.2_PU                         $365.00           

         2.2 Car 626 1988      Cam has gear for distributor       HAMA 2.2                                $365.00            

        Note:  The Mazda hydraulic lash adjuster are very hard to remove the air that is trapped in the adjuster.  Because the lifter in not pump up when you receive the head it is recommended that you remove the lifter from the rocker just prier to installing,  submerge it in a pan containing transmission fluid.  A small ball check is located in the top of the lifter.  With the ball held open, pump the lifter untill all  the air has excaped and the lifer is solid to the touch.  Reinstall the lifter being careful that you don't pump air back into the lifter as you reinstall the lifter in the rocker arm.  If the lifter still is clicking after you have driven the car on the road for ten miles you lmay have to repeat the bleeding again.  If theis fails swap the problem lifter with one fom your core head.

                

         2.2L Mazda 12 V    Ford Probe                                     HAF/MA 2.2-12V                     $325.00            

                             

             

 

         2.5L DOHC V6 Casting KL101, KL1A1, KL31-101, KL31-1A1                                    HAF/MA 2.5-KL                      $325.00            

                      Ford Probe and 626 MX6 and Mazda Millennia 1993-1997   The 1999 through 2003 have non-hydrolic or manual adjuster

Year
Your Casting #

 

         2.6L B2600 pick up Hyd lifters & jet valve (Mitsu)    HAC/MI 2.6-3VHY                  $365.00          

         2.6L B2600i Pick up Hydra lifter 12V (Mazda)           HAMA 2.6                                $425.00            

                 

         3.0L Mazda V6 SOHC 9V  per head                            HAMA 3.0-9V                         $375.00            

Right or Left

             

         3.0L V6 DOHC 12 per head    24Valve                                      HAMA 3.0-24V                        $425.00           

Right or Left

                

 

Maxda V6 DOHC 12 Valve per head    JE26-1    24V                    HAF/MA 3.0_J#26-1                 $425.00           

                      MVP & 929 1988-1992 JE fuel Injection   Come with one piece front cap or separate caps.  

Front Cam Cap

                                                                                                                                                                 next page Mitsubishi