Home back one page Chrysler 
Chrysler Next pageChrysler Iron
1.4L G12B HAC/MI
1.4-G12 $325.00
1979-1984 Colt & Champ (Mitsu
1.5L G 15B HAC/MI
1.5-G15 $325.00
Carburated 1985-1988
1.5L 4G15 1989-1990 Colt/Summit 12 Valve HAC/MI
1.5-4G15 $295.00
1.6L 4G61 DOHC 1989-1992 HAC/MI 1.6-4G61-DOHC $495.00
DOHC 1989 Eagle Summit Turbo and non
1.6L G32 HAC/MI
1.6 G32 Carb $325.00
1982-1993 Carburated
1.6L G32B HAC/MI
1.6-G32B $345.00
1984-1988 Fuel Injected
1.8L 16V SOHC (Casting #G9) HAC/MI 1.8-G9 $395.00
2.0L Neon Stratus Breeze HAC 2.0-737 #395.00
2.0L G63B d50 HAC/MI
2.0 G63-01 $345.00
Truck (Mitsu) manual adjustment
2.0L D-50 Truck 1986-1990 Hydralic HAC/MI 2.0 HY $365.00
2.0L 16Valve 4G63 (Mitsu) 1993-94 HAC/MI 2.0-DOHC $495.00
Talon and Laser
2.0L 16 Valve(Mitsu) Turbo small port HAC/MI 2.0-DOHC-T $495.00
Has two for timing sensor in front and a key shaped water outlet in the rear and small ports 1995-2002
Used in Hyundai but without the key shaped water outlet
The Chrysler 086 casting is used in the 2.0L and 2.4L Chrysler cars.
The cam used in this head have at least three different casting numbers. Because of the magnetic
pickup on the intake cam they can not be interchanged. The location of
the drive pin is also different and the timing
location of the pick up is not the same.
Cams are not supplied because the cams must be removed to get to the head bolts and identification problems with cams.
95-04 Cirrus & Stratus X Code
96-04 Caravan Pt Cruiser B Code Note: PT Cruiser is another casting
Note ( The oil drain back hole is larger on the later modle head and will leak oil if placed on the early blocks) You must match the casting numbers.
2.0-2.4L 16 Valve DOHC 1996-2004 HAC 2.0-2.4-086 $395.00
2.0-2.4L 16 Valve DOHC 1995-2004 HAC
2.0-2.4-867 $395.00
Avenger, Neon Sebrign and Talon
2.2L & 2.5L High Swirl Roller Cam HAC 2.2-2.5-782R $295.00
This head is drill for the turbo holes and will fit from 1981 though 1995.
2.5L 24 Valve SOHC V6 (picture see 3.5 intrepid) HAC 2.5-G73S4FF $415.00
2.5 24 Valve SOHC Mitu 60 Degree V6 HAC 2.5-G73 $495.00
95-2000 Sebring Avenger
The cams in these heads ave to be removed to get to the head bolt
2.6L Mitsu Caravan HAC/MI 2.6- 3V $365.00
3.0L, 3.3L, 3.4L,& 3.8L Chrysler Push Rod HAC 30.-3.3-3.8 $195.00
Casting Numbers 448015, 4445016, 4621510, & 7750405
The very early 3.0 cam as non rollar these heads will interchange except the valve cover will not fit.
3.0L HAC/MI SOHC HAC/MI 3.0 $325.00
3.5L SOHC 12 Valve Dodge HAC 3.5 $395.00
1993-1998 Casting #4325807 1998-2002 aluminum block or #4463490
3.0L V6 16V DOHC HAC/MI 3.0-DOHC $495.00
4.7L SOHC Chrysler 1999-2004 Jeep Grand Cherokee HAC 4.7_Right $395.00